Standby Mode: When the lightsaber is powered on and the blade is turned off.
Power-On Mode: When the lightsaber is powered on and the blade is turned on.

Please make sure your lightsaber is charged first before using it.

One Button Saber Instructions (operating with the button):

Operating In Standby Mode:

• Powering on: Enter standby mode by holding down the button until the button lights up.
• Turning on the blade: Click the button.
• Adjusting the volume: Press and hold the button down until the breathing light flashes 1 time before releasing.
• Toggling the power-on effect: Hold the button down until the breathing light flashes 2 times before releasing.
• Changing the blade effect: Hold the button down until the breathing light flashes 3 times before releasing.
• Changing the soundfont: Press and hold the button down until the breathing light flashes 4 times before releasing.
• Power saving mode: The saber enters power saving mode after 10 minutes of no activity.

Operating In Power-On Mode:

• Blaster effect: Click the button once.
• Lock-up loop: Hold the button down until the breathing light flashes 1 time before releasing.
• Changing the blade color: Hold the button down until the breathing light flashes 2 times before releasing.
• Toggling flash-on-clash: Flash-on-clash can be turned on or off by holding the button down until the breathing light flashes 3 times before releasing.
• Retracting the blade: Hold the button down until the breathing light flashes 4 times before releasing.

One Button Saber Instructions (operating with movement):

Operating In Standby Mode:

• Turning on the blade: Quickly turn the hilt left and right (or right and left).
• Changing the soundfont: While the blade is facing up, hold down the button and quickly turn the hilt left and right (or right and left).
• Toggling background music: While the blade is facing down, hold down the button and quickly turn the hilt left and right (or right and left).

Operating In Power-On Mode:

• Close the blade and quickly turn the hilt left and right (or right and left).
• Changing the blade color: While the blade is facing down, hold down the button and quickly turn the hilt left and right (or right and left).
• Force effect: While the blade is facing up, hold down the button and quickly turn the hilt left and right (or right and left).
• Flash-on-clash: The saber will flash and produce a sound when it hits a surface.
• Drag effect: Hold down the button and tap the blade.
• Tip melt effect: Hold down the button and jab forward.

Two Button Saber Instructions (operating with the button):

Operating In Standby Mode:

• Button types: Up and down buttons - Up = primary button, Down = secondary button. Left and right buttons - Left = primary button, Right = secondary button.
• Turning on the blade: Click the primary button.
• Changing the soundfont: Click the secondary button.
• Adjusting the volume: Press and hold the primary and secondary buttons down at the same time and release them to enter the volume adjustment mode. Then click the primary button to increase the volume, or click the secondary button to lower the volume. To exit this mode, hold down the primary and secondary buttons again and release them when you hear the prompted tone.
• Toggling the power-on effect: Hold the primary button down for 1 second and then release after hearing the prompted tone.
• Changing the blade effect: Hold the secondary button down for 1 second and then release after hearing the prompted tone.
• Powering off: Click the secondary button three times quickly.
• Power saving mode: The saber enters power saving mode after 10 minutes of no activity.

Operating In Power-On Mode:

• Retracting the blade: Click the primary button.
• Blaster effect: Click the secondary button.
• Lock-up loop: Hold the secondary button down for 1 second and then release it.
• Toggling flash-on-clash: Flash-on-clash can be turned on or off by holding down the primary and secondary buttons at the same time.

Two Button Saber Instructions (operating with movement):

Operating In Standby Mode:

• Turning on the blade: Quickly turn the hilt left and right (or right and left).
• Toggling background music: While the blade is facing down, hold down the secondary button and quickly turn the hilt left and right (or right and left).
• Changing the soundfont: While the blade is facing up, hold down the secondary button and quickly turn the hilt left and right (or right and left).

Operating In Power-On Mode:

• Close the blade and quickly turn the hilt left and right (or right and left).
• Changing the blade color: While the blade is down, hold down the secondary button and quickly turn the hilt left and right (or right and left).
• Force effect: While the blade is facing up, hold down the secondary button and quickly turn the hilt left and right (or right and left).
• Drag effect: Hold down the primary button and tap the blade.
• Tip melt effect: Hold down the secondary button and jab forward.
• Flash-on-clash: The saber will flash and produce a sound when it hits a surface.